Grout Sealing In Benefits 

Grout Sealing Services In Orange County, San Diego, Los Angeles, Riverside County, and Northern California

Sealing New Grout

Seal Systems idea of clean enough and a tile installers idea of clean enough often differ greatly.  Seal Systems will insure that your new tile installation is properly cleaned and detailed prior to sealing of the new grout.  Seal Systems uses the finest premium quality breathing penetrating type grout sealer available.  We spare no expense to provide our customers with the best possible seal on grout.  While the sealer costs in excess of $100.00 per gallon, we apply it to the point of grout saturation and carefully wipe up any excess.  Please see the grout sealing specifications  which follow.

Existing Grout

The challenge with existing grout is to get it as clean as possible so that it is ready to seal.  This means using industrial strength chemicals which should be used by professionals only.  Seal Systems will select the specific cleaner for each situation.  Our expertise insures that the grout will come as clean as possible with no damage to the grout.  In some cases where grout has become too stained it is necessary to recolor the grout  See the page titled grout recoloring.

Grout Sealing Specifications:

Description:

Invisible, below surface, nonflammable sealer

Characteristics:

Cures to form stain resistant seal

Invisible matte finish maintains natural grout appearance

Non yellowing

Will not harm isolation membrane

Allows moisture vapor transmission

Resists penetration of both oil and water based contaminants

Protects from construction period soil

Eases ongoing maintenance

Not affected by household cleaners

Invisibility insures that future grout repair will not look different

Product Testing:

Approved by Ceramic Tile Institute

Independent laboratory tests completed and passed concerning:

   Stain resistance

   Coefficient of friction

   Exterior curtain wall water penetration

   Disinfectant use

Uses:

Use as sealer to resist below surface penetration of contaminants on:

   Standard, sanded or unsanded Portland cement grout

   Latex-modified, cementitious sanded or unsanded grout

May be used on interior or exterior installations

Expected Wear:

Three years under normal use

Durability and effectiveness affected by porosity and composition of grout

Application particulars:

May be applied 48 hours after grouting

Will be completed in 1day

Ready for traffic within 30 minutes

Always applied by hand--no adverse effects on surrounding surfaces

Sealed grout should be kept dry for at least 12 hours

Will achieve full cure in 24 hours  

Contact Seal Systems

You may call us or email us to set up an estimate appointment.  If you are working on a do it yourself project feel free to call and ask for our advice.

E-Mail:  mike@tilesealing.com

Telephone:  (949) 8585211  (714) 6499841   (760) 4316848  (858) 2747700  (951) 7341240  (530) 5321947

Fax:  (949) 8585211  (760) 4316848

U.S. Mail:  22431-B160 Antonio Pkwy. # 208

                    Rancho Santa Margarita, CA 92688